Problems we fix
- The bar has to be pushed hard, or twice, to open
- The door doesn't latch after closing, so it's unlocked all night
- The latch drags or catches on the strike
- Vertical rods on double doors are bent or out of adjustment
- Dogging (holding the latch open in business hours) doesn't work, or doesn't release
- An alarmed exit goes off when it shouldn't, or doesn't when it should

Types of exit devices
Rim devices mount on the face of the door and latch to a strike on the frame. Most common on single steel doors.
Mortise devices lock into a mortise lock inside the door, often found on wood doors and offices.
Vertical rod devices latch at the top and bottom, usually on pairs of doors. Bottom rods take a beating from snow, salt and mops.
Repair or replace?
Many devices can be adjusted, lubricated and fitted with new springs or parts. If the device is cracked, the brand no longer supplies parts, or the door has been modified so many times that nothing lines up, replacement is the cleaner fix. We'll show you what we find.
Exits and safety rules
Exit devices are life-safety hardware. Never chain, padlock or block an exit to stop theft. If you're unsure what your building requires, check with your local fire department or building inspector. We can install alarmed exit devices or delayed-egress hardware where the building allows it.
Related: door closers, which are often the real reason an exit won't latch. We serve businesses across our service area, including Billerica and Lowell.
Can you add a key cylinder to our panic bar?
Many devices accept an outside trim with a cylinder. It depends on the model.
Our exit door won't latch in winter. Why?
Cold changes how doors and closers behave. A closer adjustment and strike alignment usually fix it.