First: leave it alone
The natural reaction is to grab tweezers or superglue. Glue is the worst option, because it can seal the pins and turn a simple extraction into a lock replacement. Tweezers and pins usually push the piece deeper. If part of the key is sticking out, you can try pulling it straight out with pliers, gently. If nothing is showing, stop and call.
Why keys break
- Worn keys. Keys thin out with years of use and finally crack at the shoulder.
- Stiff locks. A lock that's dirty, frozen or misaligned with the strike takes extra force to turn.
- Copies of copies. A duplicate made from a worn key carries the wear forward and fits poorly.
- Using the key as a handle. Pulling the door shut by the key puts sideways stress on it.
How we remove it
We use thin extractor tools that slide alongside the key piece, grab the cuts and draw it out. Sometimes the cylinder needs to be turned back to the home position first, or removed from the door and opened on the bench in the van. Once the piece is out, we check that the pins aren't damaged.
Then: a new key, and a fix for the cause
We cut a fresh key from the code or by reading the lock, not from the broken pieces. If the lock was hard to turn, we clean, lubricate or adjust it, or line up the strike so the key doesn't fight the bolt. A lock that's simply worn out can be swapped before we leave.
Car keys
A key broken in a car door or ignition is handled the same way. If it's a chip key, the new one will also need programming. See ignition repair and car key replacement.
Broken key calls come in from North Chelmsford, Lowell and across our service area, day and night.
Will the lock still work after?
Most of the time, yes. If the pins are damaged, we repin or replace the cylinder.